Model | PT-DZ21K | PT-DS20K | PT-DW17K |
Power supply | 200–240 V AC, 50/60 Hz (Max current requirements: 12 A @200 V) |
Power consumption | 2,300 W (0.3 W with STANDBY MODE set to ECO,*1 9 W with STANDBY MODE set to NORMAL.) |
Dissipation BTU | Max. 7,848 BTU/hour (without light output: 7,585 BTU/hour) |
DLP™ chip | Panel size | 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio) | 24.1 mm (0.95 inches) diagonal (4:3 aspect ratio) | 21.6 mm (0.85 inches) diagonal (16:9 aspect ratio) |
Display method | DLP™ chip x 3, DLP™ projection system |
Pixels | 2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels | 1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels | 1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels |
Lens | Optional powered zoom and fixed-focus lenses |
Lamp | 465 W UHM lamp x 4, replacement cycle of up to 2,000 hours*2 |
Screen size (diagonal) | 1.78-25.4 m (70-1,000 inches), 1.78–15.24 m (70–600 inches) with the ET-D75LE8, 16:10 aspect ratio | 1.78-25.4 m (70-1,000 inches), 1.78–15.24 m (70–600 inches) with the ET-D75LE8, 4:3 aspect ratio | 1.78-25.4 m (70-1,000 inches), 1.78–15.24 m (70–600 inches) with the ET-D75LE8, 16:9 aspect ratio |
Brightness*3 | 20,000 lm (four-lamp) | 17,000 lm (four-lamp) |
Center-to-corner uniformity*3 | 90% |
Contrast*3 | 10,000:1 (full on/off, with dynamic iris set to “3” ) |
Resolution | 1,920 x 1,200 pixels | 1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.) | 1,366 x 768 pixels (Input signals that exceed this resolution will be converted to 1,366 x 768 pixels.) |
Scanning frequency | SDI | SD-SDI | SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i | - |
HD-SDI | SMPTE ST 292 compliant, [YCBCR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p | - |
Dual-link HD-SDI | SMPTE ST 372 compliant, [RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, [X´Y´Z´ 4:4:4 12-bit] 2,048 x 1,080/24p, 2,048 x 1,080/24sF | - |
3G-SDI | SMPTE ST 424 compliant, [YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p, [RGB 4:4:4 12-bit /10-bit]1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p | - |
HDMI/DVI-D | 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)–WUXGA*4 (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25–162 MHz |
RGB | fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 20–162 MHz |
YPBPR (YCBCR) |
fH: 15.75 kHz, fV: 60 Hz [480i (525i)] fH: 15.63 kHz, fV: 50 Hz [576i (625i)] fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p] fH: 33.75 kHz, fV: 60 Hz [1035/60i] fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i] fH: 27.00 kHz, fV: 24 Hz [1080/24p] fH: 33.75 kHz, fV: 30 Hz [1080/30p] fH: 56.25 kHz, fV: 50 Hz [1080/50p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)] fH: 31.25 kHz, fV: 50 Hz [576p (625p)] fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p] fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i] fH: 28.13 kHz, fV: 25 Hz [1080/25p] fH: 27.00 kHz, fV: 48 Hz [1080/24sF] fH: 67.50 kHz, fV: 60 Hz [1080/60p]
|
Video/Y/C | fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
Optical axis shift*5 | Vertical | ±55 % (±44 % with the ET-D75LE6) from center of screen (powered) | ±50 % (±40 % with the ET-D75LE6) from center of screen (powered) | ±70 % (±60 % with the ET-D75LE6) from center of screen (powered) |
Horizontal | ±20 % (±15 % with the ET-D75LE6) from center of screen (powered) | ±30 % (±20 % with the ET-D75LE6) from center of screen (powered) |
Keystone correction range | Vertical: ±40°*6, horizontal: ±15° | Vertical: ±40°*6 |
Keystone correction range with optional Upgrade Kit | Vertical: ±45°*6*8, horizontal: ±40°*7*8 | - |
Installation | Ceiling/floor, front /rear |
Terminals | SDI 1 IN | BNC x 1 (3G/HD/SD-SDI) | - |
SDI 2 IN | BNC x 1 (HD/SD-SDI) | - |
3D SYNC IN/OUT | BNC x 1 (3D timing signal) | - |
3D SYNC OUT | BNC x 1 (3D timing signal) | - |
DVI-D IN | DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
HDMI IN | HDMI 19-pin x 1 (Deep Color, compatible with HDCP) |
RGB 1 IN | BNC x 5 (RGB/YPBPR/YCBCR/YC x 1) |
RGB 2 IN | D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1) |
VIDEO IN | BNC x 1 (composite video) |
SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) |
REMOTE 1 IN | M3 x 1 for wired remote control |
REMOTE 1 OUT | M3 x 1 for link control (for wired remote control) |
REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) |
LAN | RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™) |
Cabinet materials | Molded plastic |
Dimensions (W x H x D) | 620 x 291*9 x 800 mm (24-7/16" x 11-15/32"*9 x 31-1/2") (optional lens not included) |
Weight*10 | Approximately 43 kg (94.8 lbs) (optional lens not included) |
Shipping dimensions (W x H x D) | PT-DZ21KU / DS20KU / DW17KU PT-DZ21KEJ / DS20KEJ / DW17KEJ | 965 x 418 x 865 mm (38" x 16-15/32" x 34-1/16") |
PT-DZ21KE / DS20KE / DW17KE | 946 x 402 x 846 mm (38" x 15-13/16" x 33-5/16") |
Shipping weight | PT-DZ21KU / DS20KU / DW17KU | 53 kg (116.8 lbs) |
PT-DZ21KEJ / DS20KEJ / DW17KEJ | 54 kg (119.0 lbs) |
PT-DZ21KE / DS20KE / DW17KE | 51 kg (112.4 lbs) |
Operation noise*3 | 49 dB (quad lamp operation) |
Operating environment | Operating temperature: 0–45°C (32–113°F)*11, operating humidity: 10– 80 % (no condensation) |
Applicable software | Logo Transfer Software, Multi Projector Monitoring & Control Software, Geometry Manager Pro (included in the ET-UK20) | Logo Transfer Software, Multi Projector Monitoring & Control Software |
Supplied accessories | Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2) |